KITCHEN GADGETS

Should You Buy Expensive Brass Fittings?

An alloy of zinc and copper, brass fittings has been known for its strength and durability. These over sixty different kinds of brasses have specific uses for high machining, cold working, casting, electrical, architectural, fluid handling, decorative application, and so on.  Just like other materials, it has alternative in the form of stainless steel fitting, which of course, in cheaper price.

When these inexpensive stainless steel fitting can do the same job, should you still buy the expensive brass fittings?  Definitely, the answer is yes.

Basically, brass fittings have the best quality in its various uses. Its alternative might do the same job but there would be a great difference in the effectiveness of these materials. Brass fittings have better quality because of its composition, zinc and copper that made it sturdy. So, over the years, brass fittings can assure of the same efficiency in its application.

Worrying on the performance of the brass alternatives is a trouble. For several times, you need to check it out to avoid some accidents caused by its malfunction. Hence, with brass fittings, you can comfortably settle down concerning its efficiency. These are usually used in lift truck sections, railway carriages, gas valves, and gears for cars. 

Comparing the price of stainless steel fittings and brass fittings, the latter may be more expensive, yet, it would last for many years. On the other hand, stainless steel fittings, as made from recycled materials of nickel, might let you change the fittings for several times, especially is subjected to extreme temperatures. Simply stated, the cheaper alternative would be more expensive because the cost can be multiply for several times, as you need to change the fittings over and over again.

When handling fluid, the perfectly fabricated brass fittings along with a Teflon tape certainly provide a protected, leak-proof seal. More so, brass can effectively join two materials such as pipes than any other alternative, without worrying on its sturdiness especially if subjected to pressures. These are usually used by oil companies because it does not cracked easily.

Brass fittings, with a little amount of Tin, became highly non-corrosive materials. It is resistant to rust, so, it is highly recommended as materials for seawater and acidic environment. Meaning to say, this high-tensile material can be used in almost anywhere.

With its physical appearance, the golden surfaces of brass fittings make it more attractive and appealing when it comes to architectural and decorative application. It can easily match and improve the interior designs, providing an elegant atmosphere. Even jewelers use brass because it never tarnished.

If you want to make the most from your money, brass fittings are the best choice than its alternative products. The quality of brass fittings is proven to be cheaper in the long time because of its various properties. You can never go wrong with brass because of its précised specification that assures you will never do any re-work for a long time. The comfort and peace of mind it gives you can never be measured and incomparable than its alternative.

About the Author

Know more about beverage tubing at InstallationPartsSupply.com.

#9 Unibit Drill Bit 2 Hole Sizes $61.99 OHZ1720: Features: -Drill bit .-Ideal for drilling holes into thin material such as stainless steel, copper, brass, aluminum, plastic and laminates .-Single flute cutting edge for greater control through steps .-Patented single flute cutting edge gives a true round hole every time .-3 flattened shank prevents slipping in drill chuck .-Speed Point tip penetrates faster and prevents walking .-7/8 and 1-1/8 .-#9 .-Carded .

(1) WHITE 4INCH COTTON BUFF,(1) BUFFING COMPOUND 4PK,(1) TAPERED SPINDLE $23.94 Cotton Buff: 50 ply with leather center & 4 rows of concentric stitching. The faces are pre-raked for even acceptance of any type of compound. Engineered, balanced and trued for dependable long term wear. Primarily used for a final finishing buff to produce a desired finish. Buffing Compound Kit Contains 1 each 1inch x 2 ?inch Tubes: Black Emery Compound: Used for coarse buffing, removes burrs, rust, scratches, iron steel and other hard metals. Red Jewelers Rouge: Creates high luster on soft metals, brass, copper, gold and all precious metals. Gray Stainless Compound: Used for stainless steel, nickel plate and plastics. Brown Tripoli: Removes surface imperfections on all base metals brass, aluminum and pewter. Tapered Spindle: Threaded end designed to screw into leather or lacquered-center buffs.

(1) WHITE 6INCH COTTON BUFF,(1) BUFFING COMPOUND 4PK,(1) TAPERED SPINDLE $27.05 Cotton Buff: 50 ply with leather center & 4 rows of concentric stitching. The faces are pre-raked for even acceptance of any type of compound. Engineered, balanced and trued for dependable long term wear. Primarily used for a final finishing buff to produce a desired finish. Buffing Compound Kit Contains 1 each 1inch x 2 ?inch Tubes: Black Emery Compound: Used for coarse buffing, removes burrs, rust, scratches, iron steel and other hard metals. Red Jewelers Rouge: Creates high luster on soft metals, brass, copper, gold and all precious metals. Gray Stainless Compound: Used for stainless steel, nickel plate and plastics. Brown Tripoli: Removes surface imperfections on all base metals brass, aluminum and pewter. Tapered Spindle: Threaded end designed to screw into leather or lacquered-center buffs.

(1) YELLOW 4INCH COTTON BUFF,(1) BUFFING COMPOUND 4PK,(1) TAPERED SPINDLE $24.94 Cotton Buff: 50 ply with leather center & 4 rows of concentric stitching. The faces are pre-raked for even acceptance of any type of compound. Engineered, balanced and trued for dependable long term wear. Primarily used in the initial buffing process to deburr and remove scratches. This buff is a more aggressive cutting buff. Buffing Compound Kit Contains 1 each 1inch x 2 ?inch Tubes: Black Emery Compound: Used for coarse buffing, removes burrs, rust, scratches, iron steel and other hard metals Red Jewelers Rouge: Creates high luster on soft metals, brass, copper, gold and all precious metals. Gray Stainless Compound: Used for stainless steel, nickel plate and plastics. Brown Tripoli: Removes surface imperfections on all base metals brass, aluminum and pewter. Tapered Spindle: Threaded end designed to screw into leather or lacquered-center buffs.

(1) YELLOW 6INCH COTTON BUFF,(1) BUFFING COMPOUND 4PK,(1) TAPERED SPINDLE $28.97 Cotton Buff: 50 ply with leather center & 4 rows of concentric stitching. The faces are pre-raked for even acceptance of any type of compound. Engineered, balanced and trued for dependable long term wear. Primarily used in the initial buffing process to deburr and remove scratches. This buff is a more aggressive cutting buff. Buffing Compound Kit Contains 1 each 1inch x 2 ?inch Tubes: Black Emery Compound: Used for coarse buffing, removes burrs, rust, scratches, iron steel and other hard metals. Red Jewelers Rouge: Creates high luster on soft metals, brass, copper, gold and all precious metals. Gray Stainless Compound: Used for stainless steel, nickel plate and plastics. Brown Tripoli: Removes surface imperfections on all base metals brass, aluminum and pewter. Tapered Spindle: Threaded end designed to screw into leather or lacquered-center buffs.

0.5 Nominal Closet Supply Kit – Finish: Oil Rubbed Bronze $64.5 Shown in Chrome – BST1000: Brasstech introduces their Closet Supply Kit, designed to blend into your decor without dominating the room. This supply kit comes with matching flange and is available in five stunning finishes. Features: -Available in: -Oil Rubbed Bronze -Polished Brass -Polished Chrome -Satin Nickel -Weathered Copper -Kit contains: -Brasstech 403 Angle Valve, Inlet 0.5 Nom. Compression Outlet, 0.375 O.D. Compression -Brasstech 436 0.375 O.D. x 20 Flathead Rigid Supply Tube -Brasstech 441 0.625 O.D. Sure Grip Flange, 2.5 diameter -Made of solid brass -Overall Dimensions: 24 L x 4 W x 1 H

0.5 Nominal Closet Supply Kit – Finish: Polished Chrome $44.25 Shown in Chrome – BST1000: Brasstech introduces their Closet Supply Kit, designed to blend into your decor without dominating the room. This supply kit comes with matching flange and is available in five stunning finishes. Features: -Available in: -Oil Rubbed Bronze -Polished Brass -Polished Chrome -Satin Nickel -Weathered Copper -Kit contains: -Brasstech 403 Angle Valve, Inlet 0.5 Nom. Compression Outlet, 0.375 O.D. Compression -Brasstech 436 0.375 O.D. x 20 Flathead Rigid Supply Tube -Brasstech 441 0.625 O.D. Sure Grip Flange, 2.5 diameter -Made of solid brass -Overall Dimensions: 24 L x 4 W x 1 H

0.5 Nominal Closet Supply Kit – Finish: Weathered Copper $77.25 Shown in Chrome – BST1000: Brasstech introduces their Closet Supply Kit, designed to blend into your decor without dominating the room. This supply kit comes with matching flange and is available in five stunning finishes. Features: -Available in: -Oil Rubbed Bronze -Polished Brass -Polished Chrome -Satin Nickel -Weathered Copper -Kit contains: -Brasstech 403 Angle Valve, Inlet 0.5 Nom. Compression Outlet, 0.375 O.D. Compression -Brasstech 436 0.375 O.D. x 20 Flathead Rigid Supply Tube -Brasstech 441 0.625 O.D. Sure Grip Flange, 2.5 diameter -Made of solid brass -Overall Dimensions: 24 L x 4 W x 1 H

1 x 12 FatMax Cold Chisel With Bi-Material Hand Guard 16-3 $11.25 OPY1532: Features: -Used for cutting and shaping wrought iron, cast iron, steel, brass, bronze, copper, aluminum, bolts, nuts and rivets .-1 cutting edge .-12 length .-Carded .

1-Handle Tub And Shower Faucet $181.53 Image shown an Oil Rubbed Bronze Finish – DNZ2743: The Sheridan collection single lever handle pressure balance tub and shower faucet offers you a traditional look with a jazzy edge. If the six vibrant finishes don’t hook you, the style and durability will. Features : -Available in the following finishes: oil rubbed bronze -Single handle with self-cleaning two-function Shower Head -1/2 slip spout fits 1/2 copper of 1/2 IPS stub-out -Diverter on spout -Ceramic pressure balance mixing valve with stops -Massage Shower Head -All brass shower arm -Combination 1/2 copper sweat/IPS 4-port hook up -ADA compliant -Includes valve and trim in one package -Danze products are covered by a manufacturer’s limited lifetime warranty on finish, leaks and manufacturing defects -Overall dimensions: 12.40 H x 9.06 W x 7.28 D For more information on this product please view the specification sheets seen below. Sheridan Collection Installation Instructions Sheridan Collection Spec Sheet Sheridan Collection Parts List

1.0 gpf/ 3.8 Lpf Royal Optima G2 Plus Battery Powered Flush Valve for Urinal $369.19 SLN1086: Sloan is an industry leader in water conservation and bathroom needs. With this Optima G2 Plus Battery Powered Flushometer save on energy and expense with its automatic operation due to infrared sensors, and its 1.0 gpf/3.8 Lpf ultra low consumption of water. Known for durability and reliability along with functional design, this Sloan Battery Powered Flushometer is sure to exceed your expectations. Features: -1.0 gpf/3.8 Lpf Low consumption. -PERMEX Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass. -Flex Tube Diaphragm designed for improved life and reduced maintenance. -ADA Compliant OPTIMA Plus Battery Powered Infrared Sensor for automatic No Hands operation. -Infrared Sensor with Multiple-focused, Lobular Sensing Fields for high and low target detection. -Latching Solenoid Operator. -Engineered Metal Cover with replaceable Lens Window. -User friendly three (3) second Flush Delay. -Courtesy Flush Override Button. -Four (4) Size AA Batteries factory installed. – Low Battery Flashing LED. -Infrared Sensor Range Adjustment Screw. -Initial Set-up Range Indicator Light (first 10 minutes). -Chrome Plated Metal Handle Cap. -0.75 I.P.S. Screwdriver Bak-Chek Angle Stop. -Free Spinning, Vandal Resistant Stop Cap. -Adjustable Tailpiece. -High Back Pressure Vacuum Breaker Flush Connection with One-piece Bottom Hex Coupling Nut. -Spud Coupling and Flange for 0.75 Top Spud. -Sweat Solder Adapter with Cover Tube and Cast Set Screw Wall Flange. -High Copper, Low Zinc Brass Castings for Dezincification Resistance. -Fixed Metering Bypass and No External Volume Adjustment to Ensure Water Conservation. -Flush Accuracy Controlled by CID Technology. -Diaphragm, Stop Seat and Vacuum Breaker to be molded from PERMEX Rubber Compound for Chloramine resistance. -11.5 Height (to center of inlet). Specifications

1.0gpf/3.8 Lpf Royal Urinal Flush Valve $125.33 SLN1001: Regardless of your requirements, Sloan offers a variety of solutions to meet your water conservation and restroom needs. Sloan is a World-Class manufacturer of plumbing products and systems. This Royal Urinal Flush Valve is a great example of Sloan’s commitment to quality. Features: -PERMEX Synthetic rubber diaphragm with dual filtered fixed bypass. -ADA Compliant metal oscillating non-hold-open handle with triple seal handle packing. -Non-Hold-Open integral solenoid operator, fixed metering bypass and no external volume adjustment to ensure water conservation. -Free spinning vandal resistant stop cap. -High back pressure vacuum breaker flush connection and spud coupling with one-piece bottom hex coupling nut. -Sweat solder adapter with cover tube and cast set screw wall flange. -High copper, low zinc brass castings for dezincification resistance. -Flush accuracy controlled by CID technology. -Adjustable tailpiece. -Diaphragm, handle packing, stop seat and vacuum breaker to be molded from PERMEX rubber compound for chloramine resistance. -Spud coupling and flange for 0.75 top spud. -0.75 I.P.S. Screwdriver Bak-Chek angle stop. -11.5 Height (to center inlet). Specifications

1.25 Round Cabinet Knob – Finish: Antique Brass $3 Shown in Oil Rubbed Bronze Finish – QMI1000: Features -Round knob. -Available in polished brass, polished chrome, satin brass, satin nickel, antique brass, Italian bronze, oil rubbed bronze, tumbled antique brass, tumbled copper, tumbled pewter, black and white finishes. -Zinc construction. -Easy to install. -Limited lifetime warranty. -Overall dimensions: 1 H x 1.25 W x 1.25 D. Specifications

1.25 Round Cabinet Knob – Finish: Black $3 Shown in Oil Rubbed Bronze Finish – QMI1000: Features -Round knob. -Available in polished brass, polished chrome, satin brass, satin nickel, antique brass, Italian bronze, oil rubbed bronze, tumbled antique brass, tumbled copper, tumbled pewter, black and white finishes. -Zinc construction. -Easy to install. -Limited lifetime warranty. -Overall dimensions: 1 H x 1.25 W x 1.25 D. Specifications

1.25 Round Cabinet Knob – Finish: Italian Bronze $3 Shown in Oil Rubbed Bronze Finish – QMI1000: Features -Round knob. -Available in polished brass, polished chrome, satin brass, satin nickel, antique brass, Italian bronze, oil rubbed bronze, tumbled antique brass, tumbled copper, tumbled pewter, black and white finishes. -Zinc construction. -Easy to install. -Limited lifetime warranty. -Overall dimensions: 1 H x 1.25 W x 1.25 D. Specifications

1.25 Round Cabinet Knob – Finish: Polished Brass $3 Shown in Oil Rubbed Bronze Finish – QMI1000: Features -Round knob. -Available in polished brass, polished chrome, satin brass, satin nickel, antique brass, Italian bronze, oil rubbed bronze, tumbled antique brass, tumbled copper, tumbled pewter, black and white finishes. -Zinc construction. -Easy to install. -Limited lifetime warranty. -Overall dimensions: 1 H x 1.25 W x 1.25 D. Specifications

1.25 Round Cabinet Knob – Finish: Polished Chrome $3 Shown in Oil Rubbed Bronze Finish – QMI1000: Features -Round knob. -Available in polished brass, polished chrome, satin brass, satin nickel, antique brass, Italian bronze, oil rubbed bronze, tumbled antique brass, tumbled copper, tumbled pewter, black and white finishes. -Zinc construction. -Easy to install. -Limited lifetime warranty. -Overall dimensions: 1 H x 1.25 W x 1.25 D. Specifications

1.25 Round Cabinet Knob – Finish: Satin Brass $3 Shown in Oil Rubbed Bronze Finish – QMI1000: Features -Round knob. -Available in polished brass, polished chrome, satin brass, satin nickel, antique brass, Italian bronze, oil rubbed bronze, tumbled antique brass, tumbled copper, tumbled pewter, black and white finishes. -Zinc construction. -Easy to install. -Limited lifetime warranty. -Overall dimensions: 1 H x 1.25 W x 1.25 D. Specifications

1.25 Round Cabinet Knob – Finish: Satin Nickel $3 Shown in Oil Rubbed Bronze Finish – QMI1000: Features -Round knob. -Available in polished brass, polished chrome, satin brass, satin nickel, antique brass, Italian bronze, oil rubbed bronze, tumbled antique brass, tumbled copper, tumbled pewter, black and white finishes. -Zinc construction. -Easy to install. -Limited lifetime warranty. -Overall dimensions: 1 H x 1.25 W x 1.25 D. Specifications

1.25 Round Cabinet Knob – Finish: Tumbled Antique Brass $3 Shown in Oil Rubbed Bronze Finish – QMI1000: Features -Round knob. -Available in polished brass, polished chrome, satin brass, satin nickel, antique brass, Italian bronze, oil rubbed bronze, tumbled antique brass, tumbled copper, tumbled pewter, black and white finishes. -Zinc construction. -Easy to install. -Limited lifetime warranty. -Overall dimensions: 1 H x 1.25 W x 1.25 D. Specifications

1.25 Round Cabinet Knob – Finish: Tumbled Copper $3 Shown in Oil Rubbed Bronze Finish – QMI1000: Features -Round knob. -Available in polished brass, polished chrome, satin brass, satin nickel, antique brass, Italian bronze, oil rubbed bronze, tumbled antique brass, tumbled copper, tumbled pewter, black and white finishes. -Zinc construction. -Easy to install. -Limited lifetime warranty. -Overall dimensions: 1 H x 1.25 W x 1.25 D. Specifications

1.25 Round Cabinet Knob – Finish: Tumbled Pewter $3 Shown in Oil Rubbed Bronze Finish – QMI1000: Features -Round knob. -Available in polished brass, polished chrome, satin brass, satin nickel, antique brass, Italian bronze, oil rubbed bronze, tumbled antique brass, tumbled copper, tumbled pewter, black and white finishes. -Zinc construction. -Easy to install. -Limited lifetime warranty. -Overall dimensions: 1 H x 1.25 W x 1.25 D. Specifications

1.25 Round Cabinet Knob – Finish: White $3 Shown in Oil Rubbed Bronze Finish – QMI1000: Features -Round knob. -Available in polished brass, polished chrome, satin brass, satin nickel, antique brass, Italian bronze, oil rubbed bronze, tumbled antique brass, tumbled copper, tumbled pewter, black and white finishes. -Zinc construction. -Easy to install. -Limited lifetime warranty. -Overall dimensions: 1 H x 1.25 W x 1.25 D. Specifications

1.5 Drain with Overflow, Cover, and Grid Strainer – Finish: Oil Rub Bronze $21.45 Shown here in Chrome finish – DNZ1902: Customize your kitchen or lavatory sink to your liking with Danze’s 1.5 Faucet Drain with Overflow and Grid Strainer. Available in five vibrant finishes, one is sure to match your decor. Features : -Available in the following finishes: chrome, antique copper, brushed nickel, polished brass, and oil rub bronze -Includes decorative cover for lavatory sinks with overflow -For use with lavatory bowls without overflow -Clamshell package -Danze products are covered by a manufacturer’s limited lifetime warranty on finish, leaks and manufacturing defects -Overall dimensions: 8.5 H x 2.6 W For more information on this product please view the specification sheets seen below. Accessory Instructions

1.5 gpf/ 5.7 Lpf Royal Optima G2 Plus Battery Powered Flush Valve for Urinal $377.51 SLN1087: Sloan is an industry leader in water conservation and bathroom needs. With this Optima G2 Plus Battery Powered Flushometer save on energy and expense with its automatic operation due to infrared sensors, and its 1.5 gpf/5.7 Lpf low consumption of water. Known for durability and reliability along with functional design, this Sloan Battery Powered Flushometer is sure to exceed your expectations. Features: -1.5 gpf/5.7 Lpf Low consumption. -PERMEX Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass. -Flex Tube Diaphragm designed for improved life and reduced maintenance. -ADA Compliant OPTIMA Plus Battery Powered Infrared Sensor for automatic No Hands operation. -Infrared Sensor with Multiple-focused, Lobular Sensing Fields for high and low target detection. -Latching Solenoid Operator. -Engineered Metal Cover with replaceable Lens Window. -User friendly three (3) second Flush Delay. -Courtesy Flush Override Button. -Four (4) Size AA Batteries factory installed. – Low Battery Flashing LED. -Infrared Sensor Range Adjustment Screw. -Initial Set-up Range Indicator Light (first 10 minutes). -Chrome Plated Metal Handle Cap. -0.75 I.P.S. Screwdriver Bak-Chek Angle Stop. -Free Spinning, Vandal Resistant Stop Cap. -Adjustable Tailpiece. -High Back Pressure Vacuum Breaker Flush Connection with One-piece Bottom Hex Coupling Nut. -Spud Coupling and Flange for 0.75 Top Spud. -Sweat Solder Adapter with Cover Tube and Cast Set Screw Wall Flange. -High Copper, Low Zinc Brass Castings for Dezincification Resistance. -Fixed Metering Bypass and No External Volume Adjustment to Ensure Water Conservation. -Flush Accuracy Controlled by CID Technology. -Diaphragm, Stop Seat and Vacuum Breaker to be molded from PERMEX Rubber Compound for Chloramine resistance. -11.5 Height (to center of inlet). Specifications

1/2 F.I.P. x 1/2 Sharkbite Brass Elbow $7.11 Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC and is rated at 200 F., 200 P.S.I. It is made of a 1-piece DZR brass, which is a noncorrosive, low lead material. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged.. 1/2FIPX1/2 SHARK ELBOW KW’s:

1/2 FITTING BRUSH CARDED $3.34 Easy to use, contoured, heavy duty handle is perfect for cleaning copper and brass fittings. High carbon twisted steel shaft and brush gives long life and durability.

1/2 Sb X 1/4 Sb Angle Stop $5.98 1/2×1/4 shrk angle valve. Chrome-plated brass angle stop valve. Connects copper, CPVC, and PEX pipe in any combination. Certified to 200 P.S.I. and 200 F. Certified for potable water and hydronics. Easy-to-disconnect if needed. Listed to ASSE 1061/NSF 6

1/2 Titanium Coated Drill Bits $0.01 Titanium coating reduces heat & friction. Offer the best durability & speed. Designed for repetitive heavy-duty drilling. Use in steel, copper, aluminum, brass, etc.. 135 degree split point starts on contact.

1/2 WIRE HANDLE FITTING BRUSH $3.09 ID fitting brush with wire handle for cleaning copper and brass fittings. High carbon steel brush ensures a long lasting, durable and sharp cutting surface.

1/2 X .3 Cp Nipple $9.65 ANDERSON METAL BRASS PIPE NIPPLE 1/2 x 3 . Chrome Plated Pipe Nipple. Pipe fitting used to connect brass, copper & iron pipe. Fainr vibration resistance. ANDERSON METAL BRASS PIPE NIPPLE 1/2 x 3 . Chrome Plated Pipe Nipple. Pipe fitting used to connect brass, copper & iron pipe. Fainr vibration resistance .

1/2×3/8 Str Compresson Shutoff $6.27 1/2×3/8od shrk str valve. Chrome-plated brass straight stop valve. Connects copper, CPVC, and PEX pipe in any combination. Certified to 200 P.S.I. and 200 F. Certified for potable water and hydronics. Easy-to-disconnect if needed. Listed to ASSE 1061/NS

1/4 COPPER DISP IMB LO LED $18.59 1/4 turn brass ball valve, copper sweat, nails preloaded, right or left hand installation, no support bracket needed, valve complies with requirements of NSF 61, Section 9. Box: 3.2 W x 4.15 H x 2.35 D. Faceplate: 5 W x 5.89 H x .5 D. Boxed.

1/4 X 1/4 Sharkbite Coupling $4.86 1/4×1/4 sharkbt coupling. Coupling. Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F., 200 P.S.I. It is made of 1-piece DZR brass, which is a noncorrosive, low

1/4in X Mip Dishwasher Elbow $7.46 1/4×3/8m shark d/w elbow. Brass Male dishwasher elbow. Push-fit fitting connects copper, CPVC, and PEX pipe in any combination. Use no soldering or glue. Certified to 200 P.S.I. and 200 F. Certified for potable water and hydronics. Easy-to-disconnect if

1/4×1/2 Fnpt Sharkbite Adapter $0.01 1/4×1/2f shark adapter. Female iron pipe end. Brass push fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F., 200 P.S.I. It is made of 1-piece DZR brass, which is a noncorros

1/8 To 1-1/8 Tubing Cutter $10.28 STANLEY TUBE CUTTER Stanley brand (licensing agreement) 1/8-1-1/8 OD (3mm-30mm) Cuts copper, brass & aluminum tubing Carded Discovery CON, NBR, SUP, HWU. Stanley brand (licensing agreement) 1/8-1-1/8 OD (3mm-30mm) Cuts copper, brass & aluminum tubing

1/8 To 1-1/8 Tubing Cutter $15.16 Capacity 1/8 to 1-1/8 . Cuts tubing of hard or soft aluminum, brass, copper and thin wall conduit. Enclosed feed mechanism to protect threads against dirt and damage. Tubing rides freely on hardened rollers. Cuts cleanly without burrs or tubing distortion. Special Superior long-life alloy cutter wheels. Retractable, hardened reamer blade built in, locks open or closed. PROFESSIONAL QUALITY

10.24 Kitchen Sink Faucet – Finish: Old Bronze $594 Shown in Chrome – EEK1329: Features: -Kitchen sink faucet. -Available in Old Bronze, Chrome, Gold, Old Copper or Brushed Nickel finishes. -Solid brass construction. -Single hole. -14 Two flexible tubes. -360 Degree swivel spout. -Overall dimensions: 10.24 H x 7.28 D. For more information on this product please view the Sheet(s) below: Specifications Sheet

11/32x5in Multi-Purp Drill Bit $6.83 For rotary and percussion drilling. Chrome vanadium steel shaft and shank provides extra hardness and enormous strength. Special negative back grinding enables tip to bore through steel, wood, tile, marble, porcelain, glass, concrete, plastic and cast iron with a filing action rather than a cutting action. No center punch required, eliminates walking. Cobalt and Tungsten carbide tip for max hardness and resistance to heat and wear. High tech bonding allows bit to withstand drilling temperatures up to 1,900 degrees Fahrenheit. Easy to resharpen. For cordless drills, corded drills and drill presses. NOTE: Not recommended for use on mild steel. This includes aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. COBALT & TUNGSTEN CARBIDE TIP MULTI-PURPOSE Carded Dia. x Lgth. Ins.=11/32 x 5

12 Ceiling Fan Downrod – Finish: Amber Bronze $20 Pictured in Brushed Nickel – CFC1207: Casablanca’s patented Hang-Thru hanging system supports the fan from the ceiling, leaving both hands free in order to make wiring connections. The Perma-lock downrod locks the fan permanently into place and is the sturdiest, easiest to install downrod on the market. Features: -Ceiling fan downrod -Available in bright brass, antique brass, matte black, classic white, snow white, glossy black, navajo white, weathered copper, brushed nickel, rustic iron, washed bronze, bronze patina, amber bronze, graphite, architectural white, oil-rubbed bronze, aged gold, vintage pewter, mandarin red, travertine, dark bamboo, textured matte black, mocha, dark walnut, sea grass, or antique pewter finish -Patented Hang-Thru hands free installation -Perma-lock locks fan permanently into place for easy installation Overall dimensions: 12 H

12 Ceiling Fan Downrod – Finish: Antique Brass $13 Pictured in Brushed Nickel – CFC1207: Casablanca’s patented Hang-Thru hanging system supports the fan from the ceiling, leaving both hands free in order to make wiring connections. The Perma-lock downrod locks the fan permanently into place and is the sturdiest, easiest to install downrod on the market. Features: -Ceiling fan downrod -Available in bright brass, antique brass, matte black, classic white, snow white, glossy black, navajo white, weathered copper, brushed nickel, rustic iron, washed bronze, bronze patina, amber bronze, graphite, architectural white, oil-rubbed bronze, aged gold, vintage pewter, mandarin red, travertine, dark bamboo, textured matte black, mocha, dark walnut, sea grass, or antique pewter finish -Patented Hang-Thru hands free installation -Perma-lock locks fan permanently into place for easy installation Overall dimensions: 12 H

12 Ceiling Fan Downrod – Finish: Antique Pewter $15 Pictured in Brushed Nickel – CFC1207: Casablanca’s patented Hang-Thru hanging system supports the fan from the ceiling, leaving both hands free in order to make wiring connections. The Perma-lock downrod locks the fan permanently into place and is the sturdiest, easiest to install downrod on the market. Features: -Ceiling fan downrod -Available in bright brass, antique brass, matte black, classic white, snow white, glossy black, navajo white, weathered copper, brushed nickel, rustic iron, washed bronze, bronze patina, amber bronze, graphite, architectural white, oil-rubbed bronze, aged gold, vintage pewter, mandarin red, travertine, dark bamboo, textured matte black, mocha, dark walnut, sea grass, or antique pewter finish -Patented Hang-Thru hands free installation -Perma-lock locks fan permanently into place for easy installation Overall dimensions: 12 H

12 Ceiling Fan Downrod – Finish: Architectural White $13 Pictured in Brushed Nickel – CFC1207: Casablanca’s patented Hang-Thru hanging system supports the fan from the ceiling, leaving both hands free in order to make wiring connections. The Perma-lock downrod locks the fan permanently into place and is the sturdiest, easiest to install downrod on the market. Features: -Ceiling fan downrod -Available in bright brass, antique brass, matte black, classic white, snow white, glossy black, navajo white, weathered copper, brushed nickel, rustic iron, washed bronze, bronze patina, amber bronze, graphite, architectural white, oil-rubbed bronze, aged gold, vintage pewter, mandarin red, travertine, dark bamboo, textured matte black, mocha, dark walnut, sea grass, or antique pewter finish -Patented Hang-Thru hands free installation -Perma-lock locks fan permanently into place for easy installation Overall dimensions: 12 H

12 Ceiling Fan Downrod – Finish: Bronze Patina $20 Pictured in Brushed Nickel – CFC1207: Casablanca’s patented Hang-Thru hanging system supports the fan from the ceiling, leaving both hands free in order to make wiring connections. The Perma-lock downrod locks the fan permanently into place and is the sturdiest, easiest to install downrod on the market. Features: -Ceiling fan downrod -Available in bright brass, antique brass, matte black, classic white, snow white, glossy black, navajo white, weathered copper, brushed nickel, rustic iron, washed bronze, bronze patina, amber bronze, graphite, architectural white, oil-rubbed bronze, aged gold, vintage pewter, mandarin red, travertine, dark bamboo, textured matte black, mocha, dark walnut, sea grass, or antique pewter finish -Patented Hang-Thru hands free installation -Perma-lock locks fan permanently into place for easy installation Overall dimensions: 12 H

12 Ceiling Fan Downrod – Finish: Brushed Nickel $15 Pictured in Brushed Nickel – CFC1207: Casablanca’s patented Hang-Thru hanging system supports the fan from the ceiling, leaving both hands free in order to make wiring connections. The Perma-lock downrod locks the fan permanently into place and is the sturdiest, easiest to install downrod on the market. Features: -Ceiling fan downrod -Available in bright brass, antique brass, matte black, classic white, snow white, glossy black, navajo white, weathered copper, brushed nickel, rustic iron, washed bronze, bronze patina, amber bronze, graphite, architectural white, oil-rubbed bronze, aged gold, vintage pewter, mandarin red, travertine, dark bamboo, textured matte black, mocha, dark walnut, sea grass, or antique pewter finish -Patented Hang-Thru hands free installation -Perma-lock locks fan permanently into place for easy installation Overall dimensions: 12 H

12 Ceiling Fan Downrod – Finish: Classic White $11 Pictured in Brushed Nickel – CFC1207: Casablanca’s patented Hang-Thru hanging system supports the fan from the ceiling, leaving both hands free in order to make wiring connections. The Perma-lock downrod locks the fan permanently into place and is the sturdiest, easiest to install downrod on the market. Features: -Ceiling fan downrod -Available in bright brass, antique brass, matte black, classic white, snow white, glossy black, navajo white, weathered copper, brushed nickel, rustic iron, washed bronze, bronze patina, amber bronze, graphite, architectural white, oil-rubbed bronze, aged gold, vintage pewter, mandarin red, travertine, dark bamboo, textured matte black, mocha, dark walnut, sea grass, or antique pewter finish -Patented Hang-Thru hands free installation -Perma-lock locks fan permanently into place for easy installation Overall dimensions: 12 H

12 Ceiling Fan Downrod – Finish: Glossy Black $11 Pictured in Brushed Nickel – CFC1207: Casablanca’s patented Hang-Thru hanging system supports the fan from the ceiling, leaving both hands free in order to make wiring connections. The Perma-lock downrod locks the fan permanently into place and is the sturdiest, easiest to install downrod on the market. Features: -Ceiling fan downrod -Available in bright brass, antique brass, matte black, classic white, snow white, glossy black, navajo white, weathered copper, brushed nickel, rustic iron, washed bronze, bronze patina, amber bronze, graphite, architectural white, oil-rubbed bronze, aged gold, vintage pewter, mandarin red, travertine, dark bamboo, textured matte black, mocha, dark walnut, sea grass, or antique pewter finish -Patented Hang-Thru hands free installation -Perma-lock locks fan permanently into place for easy installation Overall dimensions: 12 H

12 Ceiling Fan Downrod – Finish: Graphite $13 Pictured in Brushed Nickel – CFC1207: Casablanca’s patented Hang-Thru hanging system supports the fan from the ceiling, leaving both hands free in order to make wiring connections. The Perma-lock downrod locks the fan permanently into place and is the sturdiest, easiest to install downrod on the market. Features: -Ceiling fan downrod -Available in bright brass, antique brass, matte black, classic white, snow white, glossy black, navajo white, weathered copper, brushed nickel, rustic iron, washed bronze, bronze patina, amber bronze, graphite, architectural white, oil-rubbed bronze, aged gold, vintage pewter, mandarin red, travertine, dark bamboo, textured matte black, mocha, dark walnut, sea grass, or antique pewter finish -Patented Hang-Thru hands free installation -Perma-lock locks fan permanently into place for easy installation Overall dimensions: 12 H

12 Ceiling Fan Downrod – Finish: Matte Black $11 Pictured in Brushed Nickel – CFC1207: Casablanca’s patented Hang-Thru hanging system supports the fan from the ceiling, leaving both hands free in order to make wiring connections. The Perma-lock downrod locks the fan permanently into place and is the sturdiest, easiest to install downrod on the market. Features: -Ceiling fan downrod -Available in bright brass, antique brass, matte black, classic white, snow white, glossy black, navajo white, weathered copper, brushed nickel, rustic iron, washed bronze, bronze patina, amber bronze, graphite, architectural white, oil-rubbed bronze, aged gold, vintage pewter, mandarin red, travertine, dark bamboo, textured matte black, mocha, dark walnut, sea grass, or antique pewter finish -Patented Hang-Thru hands free installation -Perma-lock locks fan permanently into place for easy installation Overall dimensions: 12 H

Tags: copper brass difference, copper brass mailbox, copper brass prices, copper brass sales, copper brass sales california